GWT01D 40V Max XGT® Brushless Cordless 4‑Speed High‑Torque 3/4″ Sq. Drive Impact Wrench Kit w/ Friction Ring Anvil (2.5Ah)

GWT01D 40V Max XGT® Brushless Cordless 4‑Speed High‑Torque 3/4″ Sq. Drive Impact Wrench Kit w/ Friction Ring Anvil (2.5Ah)

The 40V max XGT® Brushless Cordless 4-Speed High-Torque 3/4″ Sq. Drive Impact Wrench Kit w/ Friction Ring Anvil (GWT01D) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The Makita-built brushless motor delivers 1,510 ft.lbs. of Nut-Busting Torque and 1,330 ft.lbs. of Fastening Torque to out-power similar impact wrenches in heavy-load applications.

Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed.

The GWT01D features Makita’s Extreme Protection Technology (XPT™), a series of protective seals inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components. Reinforced gear housing provides additional durability on the job site.

XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

GWT01D 40V Max XGT® Brushless Cordless 4‑Speed High‑Torque 3/4″ Sq. Drive Impact Wrench Kit w/ Friction Ring Anvil (2.5Ah)

Features:

• OUTPOWER: Makita-built motor delivers 1,510 ft.lbs. of Nut-Busting Torque and 1,330 ft.lbs. of Fastening Torque; out powers similar models in heavy load applications
• OUTSMART: 3 forward and 3 reverse Auto-Stop modes for increased efficiency
• OUTLAST: XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
• Up to 70% more fastening torque*
• 4-speed power selection switch (0-950 / 0-1,150 / 0-1,400 / 0-1,800 RPM & 0-1,900 / 0-2,200 / 0-2,400 / 0-2,500 IPM) for a wide range of applications
• Full speed mode function reduces trigger pull to reach full speed
• Compact length at only 8-1/2″; ideal for working in tight spaces
• Ultra-smooth variable speed trigger provides optimum control
• Reinforced gear housing engineered for maximum job site durability
• Flexible joint isolates the battery from the grip to help reduce wear on the battery contacts
• Dual L.E.D. lights; one below the anvil and one on the tools foot for added illumination in low light environments
• The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
• The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
• XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
• The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
• The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• 40V max XGT® Lithium-Ion 2.5Ah Battery reaches a full charge in 28 minutes or less
• Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
• Only use genuine Makita® Batteries and Chargers
• *Compared to XWT07

Specifications:

• Square Drive : 3/4″
• No Load Speed (var. 4 spd.) : 0 – 950 / 0 – 1,150 / 0 – 1,400 / 0 – 1,800 RPM
• Impacts Per Minute (var. 4 spd.) : 0 – 1,900 / 0 – 2,200 / 0 – 2,400 / 0 – 2,500 IPM
• Nut-Busting Torque (ft.lbs./N•m) : 1,510 ft.lbs./2,050 N•m
• Fastening Torque (ft.lbs./N•m) : 1,330 ft.lbs./1,800 N•m
• Speed power selection : 4
• Overall Length : 8-1/2″
• Net Weight (with battery) : 8.6 lbs.
• System : 40V max XGT®
• Packaged Depth (in) : 10.12″
• Packaged Height (in) : 13.15″
• Packaged Width (in) : 16.81″
• Shipping Weight : 17.64 lbs.
• UPC Code : 088381-720991